Dynamic IT Devices Private Limited

The Flypro Fiber LC to LC Fiber Patch Cable is an enterprise-grade optical interconnect solution designed for high-density networking environments. Featuring precision-engineered small-form-factor LC connectors on both ends, this duplex cable provides the high bandwidth and low latency required for modern data centers. Whether you are connecting SFP+ transceivers in a 10G network or patching between fiber distribution frames, Flypro cables ensure a stable, high-performance link.

Key Features & Benefits:

• Premium Optical Performance: Equipped with high-quality ceramic ferrules that ensure precise alignment, resulting in extremely low insertion loss (≤0.3dB) and high return loss.

• Fiber Mode Versatility: Available in OM3 Multimode (Aqua) for high-speed 10G/40G short-range applications, or OS2 Single-Mode (Yellow) for long-distance data transmission across campuses or buildings.

• Duplex Connectivity: The dual-fiber "zip-cord" design allows for simultaneous transmit (Tx) and receive (Rx) data paths, making it ideal for standard networking equipment.

• Robust Jacket Construction: Built with a flexible, flame-retardant jacket (LSZH/PVC) that protects the delicate glass fibers while allowing for easy routing in tight rack spaces.

• Plug-and-Play Compatibility: Fully tested and compatible with all major hardware brands including Cisco, Juniper, Arista, Ubiquiti, and Dell SFP/SFP+ modules.

• Quality Assured: Each cable is individually factory-tested for optical performance to ensure reliable out-of-the-box operation.

• Fiber Type: 50/125μm (OM3) or 9/125μm (OS2)

• Connector Type: LC-LC (Small Form Factor)

• Polishing: UPC to UPC (Standard Ultra Physical Contact)

• Jacket Color: Aqua (OM3) / Yellow (OS2)

• Minimum Bend Radius: 30mm

The Cisco Console Cable (RJ45 to DB9) is a vital tool for network administrators and engineers.² This "Rollover" cable is designed to connect a computer’s serial port (DB9) to the console port (RJ45) of a Cisco networking device. It provides the necessary physical connection to access the Command Line Interface (CLI), allowing for initial configuration, troubleshooting, and management of routers, switches, and firewalls.³

Key Features and Capabilities:

• Standard Rollover Wiring: Built with the exact "pin-out" required by Cisco hardware, ensuring a stable and reliable connection to the console port.

• Universal Cisco Compatibility: Works seamlessly with all Cisco equipment equipped with an RJ45 console port, including the Catalyst series (2960, 3650, 3850), ISR Routers, and ASA Firewalls.

• High-Quality Construction: Features high-grade PVC insulation and molded strain relief to prevent cable damage and ensure a long lifespan even with frequent use.

• Plug-and-Play Simplicity: No drivers are required for the cable itself. Simply connect the DB9 end to your PC (or a USB-to-Serial adapter) and the RJ45 end to the device to begin your terminal session (via PuTTY, Tera Term, or HyperTerminal).

• 6-Foot Length: The 1.8-meter (6ft) length provides ample reach for comfortably connecting a laptop to equipment mounted in a server rack.

The Cisco 40G QSFP+ Copper Cable (QSFP-H40G-CU1M) is a high-speed, 40 Gigabit Ethernet connectivity solution designed for very short distances. It provides a cost-effective way to establish a 40G link between QSFP+ ports of Cisco switches within racks and across adjacent racks. This twinaxial copper cable is fully hot-pluggable and supports aggregate data rates of 40 Gbps.

Key Features & Benefits:

• Cisco Certified Compatibility: Guaranteed to work seamlessly with Cisco Nexus and Catalyst platforms without configuration errors.

• Low Latency & Power: Passive copper design ensures near-zero latency and zero power consumption, making it an eco-friendly choice for high-density environments.

• Robust Construction: Features high-quality twinaxial shielding for superior EMI (Electromagnetic Interference) protection and signal integrity.

• Plug-and-Play: Fully compliant with SFF-8436 standards, allowing for immediate deployment with no software setup required.

• Connector Type: QSFP+ to QSFP+

• Standard: IEEE 802.3ba (40GBASE-CR4)

• Temperature Range: 0 to 70°C (32 to 158°F)

• Minimum Bend Radius: 33mm (approx)

The HPE Aruba J9283D is a premium 10 Gigabit SFP+ to SFP+ Direct Attach Copper (DAC) cable designed for high-speed, short-range connectivity. Spanning 3 meters, this passive twinaxial cable provides a cost-effective and energy-efficient alternative to using SFP+ transceivers and fiber optic cables for interconnecting switches, servers, and storage in your network rack.

Key Features & Benefits:

• High Performance: Supports data transfer rates up to 10 Gbps, ensuring fast and reliable network performance for bandwidth-heavy applications.

• Passive Architecture: Being a Passive DAC, it features a simplified design with zero power consumption and near-zero latency, making it an eco-friendly choice for data centers.

• Seamless Compatibility: Specifically engineered for the HPE Aruba ecosystem. It works flawlessly with Aruba 2530, 2920, 2930F, 3810, and 5400R switch series without any firmware errors.

• Plug-and-Play Simplicity: No software configuration or drivers required. Simply plug the SFP+ connectors into your device ports for an instant, high-speed link.

• Robust & Durable: Built with high-quality copper twinaxial wiring and a rugged PVC jacket, this cable is designed to withstand frequent handling and maintain signal integrity.

   

Technical Specifications:

• Connector Type: SFP+ to SFP+

• Data Rate: 10 Gbps

• Cable Length: 3 Meters (9.8 ft)

• Cable Type: Passive Copper (DAC)

• Impedance: 100 Ohms

• Compliance: Fully compliant with SFF-8431 and SFP+ MSA standards.

The Cisco CAB-STACK-50CM is a high-speed StackWise interconnect cable designed specifically for the Cisco Catalyst 3750, 3750-E, and 3750-X series switches. Measuring 0.5 meters (1.6 feet), this cable allows multiple switches to be joined together to operate as a single logical unit. This "stacking" capability simplifies management, increases port density, and provides high-speed data redundancy across the switch stack.

Key Features & Benefits:

• StackWise Technology: Enables a 32-Gbps switching fabric, allowing all switches in the stack to behave as a single entity with a single IP address and configuration.

• Hot-Swappable: This cable allows you to add or remove switches from a stack without power-cycling the entire group, ensuring zero downtime for your network.

•  Resilient Connectivity: When used in a "ring" configuration, the CAB-STACK-50CM ensures that if one cable or switch fails, the rest of the stack continues to function at high speeds.

• Optimized Length: The 50cm (0.5m) length is ideal for connecting switches that are mounted directly on top of each other in a standard 19-inch server rack, minimizing cable clutter.

• Heavy-Duty Shielding: Built with high-quality shielded copper to prevent EMI (Electromagnetic Interference) and ensure data integrity at high speeds.

   

• Model: CAB-STACK-50CM

• Length: 50 Centimeters / 1.6 Feet

• Compatibility: Catalyst 3750, 3750-G, 3750-E, 3750-X Series

• Data Rate: Supports up to 32 Gbps (StackWise)

   

• Type: StackWise Interconnect (Not for 2960-X or 3850 series)

The Arista Compatible 100G QSFP28 to QSFP28 DAC Cable is a high-performance, cost-effective solution for short-range high-bandwidth connections. Designed for up to 100 Gbps data rates, this passive copper cable is ideal for interconnecting Arista switches within the same rack or adjacent racks in a data center environment. It offers a low-latency, low-power alternative to optical transceivers and fiber cables.

Key Features & Benefits:

• 100GbE Performance: Supports aggregate data rates up to 100 Gbps, making it perfect for top-of-rack (ToR) and spine-leaf architectures.

• Passive Design: Consumes 0W of power, significantly reducing overall data center energy costs and heat generation.

• Hot-Swappable: Fully compliant with SFF-8665 MSA, allowing you to plug and unplug the cable without powering down your network equipment.

• Durable Construction: Built with high-quality twinaxial copper wire to ensure signal integrity and long-term reliability in high-density environments.

• Plug-and-Play: Requires no configuration; simply plug into your QSFP28 ports for instant high-speed connectivity.

The Cisco QSFP-H40G-CU1M is a 40 Gigabit Ethernet QSFP+ Direct Attach Copper (DAC) Twinax cable designed for short-distance, high-speed data connections within data centers and enterprise networks. With a cable length of 1 meter, it provides a cost-effective, low-latency alternative to optical transceivers for connecting switches, routers, and servers equipped with QSFP+ ports.

This passive copper cable supports 40G Ethernet (40GbE) and is factory-terminated with QSFP+ connectors on both ends, ensuring reliable performance and plug-and-play installation. The QSFP-H40G-CU1M is ideal for rack-to-rack or switch-to-switch interconnections where low power consumption and high throughput are required.

The cable is Cisco-qualified and tested, ensuring full compatibility and optimal performance with Cisco networking hardware.

• Primary Category: Transceiver / Interface Cables

• Secondary Category: Networking Cables & Accessories

The Cisco 40G QSFP+ Active Optical Cable (AOC) is a high-performance, plug-and-play optical interconnect designed for modern data centers and enterprise networks. It provides reliable 40 Gigabit Ethernet connectivity between QSFP+ ports on switches, routers, servers, and storage devices, ensuring low latency, minimal signal loss, and superior signal integrity.

These cables are engineered for durability and precision, making them ideal for high-speed networking, data center backbone links, and short-distance optical connections. The QSFP+ connectors enable easy installation, hot-pluggable flexibility, and broad compatibility with various network devices.

• Connector Type: QSFP+ to QSFP+

• Data Rate: 40 Gbps high-speed connectivity

• Cable Type: Active Optical Cable (AOC)

• Low Latency & Minimal Signal Loss: Ensures stable network performance

• Durable Construction: High-quality optical fiber with robust jacket

• Lengths Available: 1m, 3m, 5m, or customized options

• Hot-Pluggable Connectors: Easy to install and maintain

• Broad Compatibility: Works with Cisco switches, routers, servers, and other QSFP+ devices

• Provides high-speed, reliable optical connectivity

• Reduces network downtime with plug-and-play QSFP+ connectors

• Ideal for high-density, high-bandwidth data center environments

• Lightweight and energy-efficient design for better airflow in racks

• Ensures long-term network reliability and performance

• Data center switch-to-switch connectivity

• High-speed server interconnections

• Enterprise LAN/WAN network backbones

• Storage area network (SAN) connections

• Short- to medium-distance optical links within racks

The Cisco 40G QSFP+ Active Optical Cable (AOC) delivers high-performance, low-latency, and reliable 40G connectivity for modern data centers and enterprise networks. Its optical design ensures superior signal integrity, minimal interference, and ease of installation. Ideal for high-bandwidth applications, virtualization, and storage networks, this cable provides a cost-effective and durable solution for critical network infrastructure.

Cat 6 Cable is a high-performance networking cable designed for fast, stable, and secure data transmission. It supports Gigabit Ethernet applications and is ideal for home, office, CCTV, and enterprise networking.
Built with high-quality copper conductors and strong outer insulation, Cat 6 Cable ensures low signal loss, excellent noise reduction, and long-distance reliability.

This cable is widely used in LAN networks, routers, switches, IP cameras, servers, and structured cabling installations.

• ✔ Category: Cat 6 (Category 6)

• ✔ Speed Support: Up to 1 Gbps

• ✔ Bandwidth: 250 MHz

• ✔ Conductor Material: 100% Copper / CCA (as per stock)

• ✔ Insulation: High-quality PVC / LSZH

• ✔ Pairs: 4 Twisted Pairs (UTP)

• ✔ Noise Reduction: Better crosstalk performance

• ✔ Ideal For: LAN, CCTV, routers, servers, switches, data centers

• Office & home LAN networks

• CCTV camera installations

• Wi-Fi routers & access points

• Servers & switches

• Telecom and data centers

• Structured cabling

The HPE Aruba J9734A 2920 Series 0.5m Switch Stacking Cable is a high-quality stacking cable designed for seamless connectivity between Aruba 2920 Series switches. It enables stackable switches to operate as a single logical unit, improving network performance, redundancy, and simplifying management. Ideal for enterprise networks, data centers, and high-density networking environments.

• ✔ Compatible Models: HPE Aruba 2920 Series Switches

• ✔ Cable Length: 0.5 meters (short distance, internal stacking)

• ✔ Purpose: Switch stacking for single logical unit operation

• ✔ High-Speed Connectivity: Supports high-bandwidth inter-switch communication

• ✔ Plug-and-Play: Easy installation without configuration changes

• ✔ Durable Build: Reliable design for enterprise network environments

• ✔ Ideal For: Data centers, enterprise networks, and high-density switch deployments

The SC Single Mode Fiber Optic Patch Cord is designed for high-speed, long-distance data transmission with minimum signal loss. It provides exceptional performance for telecom, networking, FTTH, and data center applications. Made with high-quality single-mode fiber and SC connectors, this patch cord ensures stable connectivity and superior optical performance.

• ✔ Connector Type: SC to SC / SC to LC (optional)

• ✔ Fiber Type: Single Mode (OS1/OS2)

• ✔ Wavelength Support: 1310nm / 1550nm

• ✔ Cable Diameter: 2.0mm / 3.0mm

• ✔ Insertion Loss: Low (≤ 0.3dB)

• ✔ Return Loss: High (≥ 50dB)

• ✔ Durable Jacket: LSZH / PVC

• ✔ Cable Length Options: 1m, 2m, 3m, 5m, 10m, custom lengths

• FTTH (Fiber to the Home)

• Telecom and ISP networks

• Data centers

• Networking equipment

• Optical transmission systems

• CATV & broadband connections

• High-precision SC connectors

• Stable signal transmission over long distances

• Excellent durability and flexibility

• Industry-standard performance

The D-Link LAN Cable is a high-quality networking cable designed to provide reliable and fast data transmission for home, office, and enterprise networks. Compatible with computers, switches, routers, IP cameras, and other Ethernet-enabled devices, this cable ensures stable connectivity and minimal data loss.

Available in Cat 5e, Cat 6, and Cat 6a variants, the D-Link LAN Cable supports Gigabit Ethernet speeds, making it ideal for high-speed data transfer, video streaming, VoIP, and gaming. Its durable PVC or LSZH jacket protects against wear and tear, while twisted pair design reduces crosstalk and interference.

• ✔ High-speed data transmission up to 1 Gbps (Cat 6)

• ✔ Supports Gigabit Ethernet, Fast Ethernet, and PoE applications

• ✔ 4 Twisted Pairs (UTP) for minimal crosstalk

• ✔ Durable PVC / LSZH jacket for long-term use

• ✔ Available in various lengths (1m, 3m, 5m, 10m, 20m, etc.)

• ✔ Ideal for LAN networks, CCTV, routers, switches, and servers

• ✔ Easy to install and plug-and-play

• Home and office LAN networks

• Connecting computers, routers, and switches

• CCTV and IP camera networks

• VoIP phones and communication systems

• Data centers and server connections

• Gaming and multimedia streaming setups