Dynamic IT Devices Private Limited

The Cisco VS-S2T-10G-XL Supervisor Engine 2T XL is a high-performance control processor engineered for the most demanding enterprise and data center networks. It integrates a 2-Terabit crossbar switch fabric, enabling a massive 80 Gbps switching capacity per slot across all Catalyst 6500 E-Series chassis. This "XL" variant features expanded hardware tables to support up to 1 million IPv4 routes and 1 million NetFlow entries, providing the ultimate scalability for complex routing environments.

Key Features:

• Next-Gen Performance: Delivers up to 720 Mpps of IPv4 throughput and 390 Mpps for IPv6, ensuring wire-speed performance for Layer 2 and Layer 3 services.

• Integrated Uplinks: Features 2 x 10GBASE-X (X2) ports and 3 x 1G SFP ports, providing high-speed fiber connectivity directly from the supervisor.

• PFC4XL Technology: Equipped with the Policy Feature Card 4XL (PFC4XL), enabling hardware-accelerated security, QoS, and NetFlow without impacting performance.

• High Availability: Supports Stateful Switchover (SSO) and Nonstop Forwarding (NSF) to ensure sub-second recovery and 24/7 network uptime.

• VSS Ready: Fully supports Virtual Switching System (VSS), allowing two physical chassis to act as a single logical 4-Terabit switch.

• Massive Scalability: Built to handle the largest enterprise needs with support for 128k MAC addresses and over 1 million routing entries.

The HPE Aruba 2920-24G-PoE+ (J9729A) is a high-performance, scalable Layer 3 switch designed for enterprise branch offices and campus networks. Featuring 24 Gigabit Ethernet ports with full PoE+ support, this switch is ideal for powering IP phones, wireless access points, and security cameras. Its modular design allows for optional 10GbE uplinks and high-speed stacking, providing the flexibility to grow your network as your bandwidth needs increase.

Key Features & Benefits:

• Powerful PoE+ Capability: Delivers up to 370 Watts of PoE power, supporting the latest high-power IoT devices and 802.11ac access points.

• Stackable Performance: Supports a modular stacking system (up to 4 switches) with up to 40 Gbps of stacking throughput, allowing you to manage multiple units as a single logical device.

• Flexible Uplinks: Includes 4 dual-personality ports (RJ-45 or SFP) for fiber connectivity, with optional slots for two 10GbE modules (SFP+ or 10GBASE-T).

• Advanced Layer 3 Routing: Includes support for static and RIP routing, OSPF, ACLs, and robust QoS to prioritize critical voice and video traffic.

• Lifetime Warranty: Backed by Aruba’s Limited Lifetime Warranty, ensuring long-term reliability and peace of mind for your network infrastructure.

• Model Number: J9729A

• PoE Standards: IEEE 802.3at (PoE+) / 802.3af

• Throughput: Up to 95.2 Mpps (Million packets per second)

• Stacking: Optional (Requires Stacking Module)

• Management: AirWave, Central, Command-line interface, Web browser

The Cisco Business CBS350-8T-E-2G is a high-performance, managed Gigabit switch designed for small and medium businesses. Part of the Cisco Business 350 Series, this switch provides reliable connectivity and advanced security features to help grow your business infrastructure. It offers a simple management interface and robust features to accelerate your digital transformation.

Key Features:

• High Performance: Gigabit Ethernet ports provide high-speed data transfer for your office devices.

• Smart Management: Easily managed through the Cisco Business Dashboard or an on-box web UI.

• Advanced Security: Includes integrated security features like IEEE 802.1X and Port Security to protect your network from unauthorized access.

• Energy Efficient: Designed with Energy Efficient Ethernet (IEEE 802.3az) to reduce power consumption without compromising performance.

• Fanless Design: Silent operation makes it perfect for placement in open office spaces or on desks.

Best For:

• Small to Medium Business Networks

• Desktop Connectivity for Workstations

• Secure Retail and Branch Office Networking

• Quiet Office Environments

The Cisco C3850-NM-4-1G is a network module expansion card designed for the Cisco Catalyst 3850 Series switches. It provides four 1-Gigabit Ethernet ports for uplinks or network expansion, enabling flexible connectivity options for enterprise networks. This module is hot-swappable, allowing installation or replacement without shutting down the switch. It supports high-performance Layer 2 and Layer 3 switching, making it suitable for data center uplinks, aggregation, or inter-switch connections.

Key Features:

• Port Count: 4 × 1-Gigabit Ethernet ports

• Interface Type: RJ45 copper

• Module Type: Network Module (NM) for Catalyst 3850

• Hot-Swappable: Yes

• Use Case: Uplink connectivity, network expansion, aggregation for enterprise deployments

• Compatibility: Cisco Catalyst 3850 Series Switches

• Layer Support: Layer 2 / Layer 3 switching

• Power & Cooling: Draws power from host switch, no separate power needed

Benefits:

• Expands network connectivity without replacing the switch

• Simplifies network upgrades and uplink management

• Reliable, Cisco-certified module for enterprise deployments

The Cisco ME-3400G-2CS-A is a high-performance managed Layer 3 Gigabit Ethernet switch designed for enterprise and service provider networks. It provides advanced switching, routing, and network management features suitable for campus, metro, or aggregation environments. This switch supports redundant power supplies, robust QoS, and scalable uplinks, making it reliable for mission-critical applications.

The ME-3400G-2CS-A includes 24 Gigabit Ethernet ports and 2 combo ports (copper/SFP), enabling flexible connectivity options for fiber or copper uplinks. It supports Layer 3 routing protocols, VLANs, and multicast traffic management, ensuring efficient and secure network performance. The switch is rack-mountable and built for high availability with resilient hardware design.

Key Features:

• Port Count: 24 × Gigabit Ethernet + 2 Combo Ports

• Switch Type: Managed Layer 3

• Port Speed: 10/100/1000 Mbps

• Layer Support: Layer 2/Layer 3

• Redundant Power Supply Support: Yes

• Uplink Options: 2 combo SFP/copper ports

• Mounting Type: Rack-mountable

• Usage/Application: Enterprise networks, campus aggregation, metro connectivity

Benefits:

• High-performance switching and routing in one device

• Flexible uplinks with combo ports for copper or fiber

• Supports Layer 3 protocols for efficient routing

• Reliable, rack-mountable design for enterprise deployments

•  

  • High-Density 10G Connectivity: Features 16 ports of 10 Gigabit Ethernet using SFP+ transceivers, allowing for flexible fiber-optic connections across various distances.

  • Advanced Performance with DFC4: The integrated DFC4 (Distributed Forwarding Card) offloads the forwarding engine duties from the supervisor to the line card, providing up to 60 Mpps of distributed forwarding performance.

  • Virtual Switching System (VSS) Support: Optimized for Cisco VSS technology, this module allows two physical switches to be managed as a single logical entity, increasing system bandwidth to 800 Gbps and providing sub-second failover.

  • Energy Efficient Design: Part of the 6800 series line cards, it is designed with the latest silicon technology to reduce power consumption per port compared to older 6700 series modules.

  • Comprehensive Security & QoS: Supports hardware-based TrustSec (IEEE 802.1ae MacSec) for point-to-point encryption and advanced Quality of Service (QoS) for prioritized traffic handling in enterprise environments.

The Cisco WS-X6816-10G-2T is a high-performance, 16-port 10 Gigabit Ethernet Interface Module designed for the Catalyst 6500-E and 6807-XL Series switches. Engineered for the campus and data center core, this module provides massive scalability and high-density 10G fiber connectivity. It comes equipped with the Distributed Forwarding Card 4 (DFC4), which enables hardware-based transition for advanced features like VSS (Virtual Switching System), high-speed IPv4/IPv6 routing, and hardware-accelerated ACLs.

Key Features and Capabilities:

Technical Specification Selection (Based on your UI)

Based on the image you shared earlier, here is how you would categorize this specific module:

Specification Field	Selection for WS-X6816-10G-2T
Card Type (Important)	Fiber NIC (or Server/Interface Module)
LAN Speed (Important)	10 Gbps
Interface Type (Important)	Other (This is a Chassis Line Card, not PCIe)
Speed (Important)	10Gbps
Supportive Speed	1000 Mbps (Supports 1G/10G SFP modules)
Usage/Application	Core/Distribution Switch Connectivity
Port Nos	16 Ports

•  

The Cisco C9200-NM-4X is a high-density, hot-swappable Network Module designed specifically for the Cisco Catalyst 9200 Series switches. This module is the perfect solution for businesses looking to upgrade their network backbone, providing four (4) dedicated 10G SFP+ slots. It allows for seamless high-speed fiber uplinks to core switches, servers, or storage arrays, significantly reducing network congestion.

Key Features & Benefits:

•  High-Speed Connectivity: Features four SFP+ ports that support 10Gbps each, providing a total aggregate uplink bandwidth of 40Gbps.

• Backward Compatibility: The SFP+ slots are versatile and can support both 10G SFP+ and 1G SFP transceiver modules, offering flexibility for various network environments.

•  Hot-Swappable Design: Can be installed or replaced without powering down the switch, ensuring maximum network uptime and ease of maintenance.

• Enhanced Scalability: Allows organizations to scale their bandwidth as their data needs grow without replacing the entire switch infrastructure.

• Enterprise-Grade Reliability: Built with Cisco’s industry-leading hardware standards to ensure long-term stability and high signal integrity in demanding environments.

Compatibility Note: This module is compatible with Cisco Catalyst 9200 modular uplink models. (Note: It is not compatible with Catalyst 9200L models, which feature fixed uplinks.)

• Device Type: Expansion Module / Network Module

• Form Factor: Plug-in Module

• Ports: 4 x 10 Gigabit SFP+

• Cabling Type: Ethernet 10GBase-X

• Data Link Protocol: 10 Gigabit Ethernet

• Data Transfer Rate: 10 Gbps per port

The Aruba 3810M 48G PoE+ 4SFP+ (JL428A) is a powerful and reliable Layer 3 network switch designed for large enterprise networks and campus environments. This switch provides high-performance switching, low latency, and enhanced security features. Equipped with 48 PoE+ ports, it is perfect for powering IP phones, Wireless Access Points, and Security Cameras.

Key Features:

• High Power Delivery: Includes 48 ports of IEEE 802.3at PoE+ (up to 30W per port) for seamless device connectivity.

• Super-Fast Uplinks: Features 4 fixed SFP+ ports (1GbE/10GbE) for high-speed fiber connectivity.

• Smart Management: Supports Aruba ClearPass Policy Manager and Aruba AirWave for centralized control.

• Stackable Design: Easily stackable to ensure your network remains scalable and future-proof.

• Advanced Layer 3 Capabilities: Includes Static and RIP routing, OSPF, ACLs, and full IPv6 support.

• Superior Performance: Engineered for low latency and wire-speed switching capacity.

Technical Specifications:

• Model Number: JL428A

• Ports: 48 x 10/100/1000 PoE+ Ports

• Uplink Ports: 4 x SFP+ (1/10GbE) Ports

• PoE Budget: 740W (Internal Power Supply)

• Switching Capacity: 320 Gbps

• Throughput: Up to 190.5 Mpps

• Form Factor: 1U Rack-mountable

• Memory & Processor: Dual Core ARM Coretex A9 @ 1 GHz

Applications:

• Enterprise Networks: Ideal for large office buildings and corporate campus networks.

• Smart Offices: Perfect for connecting and powering VoIP phones and high-definition CCTV systems.

• Data Centers: Suitable for server connectivity requiring high-speed 10G uplinks.

The HPE Aruba 2530-48G PoE+ Switch (J9772A) is a high-performance, fully managed Layer 2 switch designed for enterprise access networks. With 48 Gigabit Ethernet ports and PoE+ support, it provides reliable connectivity for a wide range of devices including IP phones, wireless access points, and security cameras.

The switch delivers robust network performance, energy efficiency, and security features, making it ideal for small-to-medium-sized enterprises and branch office deployments. Built for simplicity and reliability, the 2530 series offers easy setup, low total cost of ownership (TCO), and Aruba’s industry-leading management options, including web GUI, CLI, and Aruba AirWave or Aruba Central for centralized monitoring.

The PoE+ capabilities allow flexible deployment of powered devices without the need for separate power supplies, simplifying installations and reducing cabling costs. With support for VLANs, QoS, ACLs, and IPv4/IPv6 routing, the Aruba 2530-48G PoE+ ensures high-performance connectivity for modern enterprise applications.

• 48 Gigabit Ethernet ports for high-speed connectivity

• 4 SFP uplink ports for fiber or additional switch connections

• Full-duplex switching with wire-speed performance

• Supports PoE+ (802.3at) on all PoE-enabled ports

• Provides up to 370 W total PoE budget

• Ideal for IP phones, access points, security cameras

• VLAN support for network segmentation

• Link aggregation (LACP)

• Spanning Tree Protocol (STP/RSTP/MSTP)

• Quality of Service (QoS) for traffic prioritization

• 802.1X port-based authentication

• Access Control Lists (ACLs)

• DHCP snooping, IP source guard

• Dynamic ARP inspection

• Aruba Web GUI for easy configuration

• Command-Line Interface (CLI)

• SNMP for network monitoring

• Aruba AirWave or Aruba Central for centralized management

• IEEE 802.3az Energy Efficient Ethernet

• Fanless or low-noise fan design options (depending on model)

• Reduced power consumption without compromising performance

• Enterprise access layer switch

• Branch offices, SMBs, and small campuses

• PoE deployment for IP phones, APs, and cameras

• Network segmentation and high-density user environments

The Juniper EX4400-24X is a cloud-ready, AI-powered Ethernet access switch designed for high-performance enterprise campus networks. It delivers advanced security, seamless scalability, and intelligent management, making it ideal for modern IT infrastructures requiring reliable connectivity, PoE support, and AI-driven insights. As part of Juniper's EX Series, this switch integrates with Juniper Mist AI for simplified operations, automated troubleshooting, and enhanced user experiences.

Key Features:

• Port Configuration: 24 x 1/10GbaseX ports for multigigabit Ethernet connectivity, plus 2 x 100GbE/40GbE uplinks for high-speed aggregation. Compatible with optional uplink modules like 4 x 25GbE MACsec AES256, 4 x 10GbE non-MACsec, and 1 x 100GbE MACsec AES256.
• AI-Driven Management: Powered by Juniper Mist AI and Marvis Virtual Network Assistant for automated configuration, proactive issue resolution, and real-time visibility into network performance.
• Advanced Security: Supports MACsec AES-256 encryption, microsegmentation with group-based policies (GBP), and zero-trust security to protect against threats.
• Campus Fabric Support: EVPN-VXLAN extension to the access layer for flexible, scalable virtual networks; Virtual Chassis technology for stacking up to 10 switches with 400 Gbps interconnect.
• Telemetry and Monitoring: Flow-based telemetry, sFlow, IPFIX for granular traffic analysis and optimization.
• Power over Ethernet (PoE): Compatible with PoE/PoE++ models in the series for powering endpoints like access points and IP phones (note: EX4400-24X is non-PoE variant; check related models for PoE needs).
• Cloud Integration: Fully managed via Juniper Wired Assurance for easy onboarding, provisioning, and zero-touch deployment in cloud environments.

Benefits:

• High Performance: Delivers up to 1080 Gbps bidirectional data rate and 803 Mpps throughput with low latency, ensuring smooth handling of bandwidth-intensive applications like video conferencing, cloud services, and IoT.
• Scalability and Reliability: Supports up to 112,000 MAC addresses, 80,000 IPv4 routes, 40,000 IPv6 routes, and 4093 VLANs; redundant power supplies and fans for 24/7 uptime.
• Cost-Effective Operations: Reduces manual IT efforts with AI automation, lowering operational costs and improving end-user experiences in campuses, branches, or data centers.
• Eco-Friendly Design: Energy-efficient with variable-speed fans; operates in temperatures from 32°F to 113°F (0°C to 45°C) and humidity up to 95% non-condensing.

Technical Specifications:

• Form Factor: 1U rack-mountable (Dimensions: 17.39 x 1.72 x 16.93 inches / 44.17 x 4.37 x 43 cm).
• Backplane Speed: 400 Gbps Virtual Chassis interconnect.
• Latency: Low-latency switching for real-time applications.
• Power Supply: Ships with 1050W AC power supply; supports up to 1600W with compatible Junos OS releases. Power consumption varies based on load (contact for details).
• Resiliency: Redundant internal load-sharing power supplies and variable-speed fans.
• QoS: 12 queues per port (8 unicast, 4 multicast) for prioritized traffic.
• Jumbo Frames: Up to 9216 bytes.
• ARP Entries: 24,000.
• Environmental: Operating altitude up to 10,000 ft; acoustic noise levels optimized for office environments.
• Software: Runs on Junos OS with support for the latest releases (e.g., 22.3R1 or higher for enhanced features).

The Juniper Networks EX4550-32T-AFO is a high-density, low-latency 10GbE switch designed for top-of-rack data center deployments and campus aggregation. It offers 32 fixed 10G Base-T (copper) ports in a compact 1U form factor, providing a scalable and high-performance solution for demanding network environments.

Key Technical Features:

• 32 Fixed 10GbE Ports: Provides 32 ports of 10G Base-T (RJ45), supporting high-speed copper connectivity over Cat6a or Cat7 cabling.

• Scalable Performance: Supports up to 480 Gbps of switching capacity (L2 and L3).

• Virtual Chassis Technology: Allows up to 10 switches to be interconnected and managed as a single logical device, simplifying large-scale management.

• AFO (Airflow Out): Features Front-to-Back airflow (Port-to-FRU), optimized for modern data center cooling architectures.

• Modular Expansion: Includes an expansion slot that can support additional 10GbE or 40GbE modules for future growth.

• High Availability: Equipped with dual redundant, hot-swappable power supplies and fans to ensure maximum uptime.

• Layer 3 Capabilities: Full support for advanced routing protocols like OSPF, BGP, and IS-IS, along with comprehensive security features.

The Juniper EX2200-24P is a high-performance, compact, and energy-efficient Ethernet switch designed for enterprise access networks, small to medium businesses, and branch offices. It offers 24 Gigabit Ethernet ports with PoE (Power over Ethernet), allowing seamless connection and power supply to devices like IP phones, wireless access points, and security cameras.

This switch supports Layer 2 and basic Layer 3 routing features, advanced network management capabilities, and high availability options to ensure reliable and secure network operations. With its fanless design, the EX2200-24P is ideal for quiet office environments without compromising performance.

• 24 × 10/100/1000 Mbps Ethernet Ports

• PoE / PoE+ support for powering devices directly via Ethernet

• 2 × 1Gb SFP uplink ports for flexible connectivity

• Supports VLANs, Spanning Tree, and Layer 3 static routing

• Provides basic routing between subnets for branch networks

• Fanless design for quiet operation

• Low power consumption while maintaining full performance

• Managed via Juniper Junos OS

• Supports SNMP, CLI, and web-based GUI management

• Advanced security and access control features

• Rack-mountable (1U height)

• Ideal for office, campus, and small data center networks

• Enterprise access networks

• Small to medium business networks

• Powering IP phones, wireless APs, and cameras via PoE

• Branch office routing and network management

The Juniper Networks MX480 is a robust, modular, and carrier-grade routing platform designed for large enterprise edge, data centers, and service provider environments. It offers high density, reliability, and throughput in a compact 8U form factor, making it ideal for high-capacity applications.

Key Technical Features:

• Modular Architecture: Features a modular design with 6 slots that support a variety of Dense Port Concentrators (DPCs), Modular Port Concentrators (MPCs), and Flexible PIC Concentrators (FPCs).

• Massive Throughput: Delivers up to 9 Tbps of system capacity, providing wire-speed performance for high-bandwidth services.

• High Availability: Fully redundant hardware, including power supplies, fan trays, and Routing Engines (RE), ensuring 99.999% system uptime.

• Advanced Edge Features: Supports advanced services like VPNs, high-quality QoS, and comprehensive Layer 2 and Layer 3 features including BGP, OSPF, and IS-IS.

• SDN Ready: Fully programmable and compatible with Software-Defined Networking (SDN) solutions like Juniper Contrail.

• Versatile Connectivity: Supports a wide range of interfaces from 1GbE up to 100GbE and 400GbE ports (depending on the installed modules).

The Juniper Networks QFX5100-24Q-AFI is a highly flexible, high-performance, and low-latency Layer 2 and Layer 3 switch optimized for high-density data center environments. It is engineered to support cloud-scale infrastructures, providing a powerful foundation for leaf-and-spine architectures and top-of-rack deployments.

Key Features & Technical Specifications:

• Unmatched Port Density:

  • 24 Fixed 40GbE QSFP+ Ports: Delivers massive bandwidth out of the box.

  • Breakout Capability: Each 40GbE port can be split into 4 x 10GbE ports using breakout cables, supporting up to 96 x 10GbE ports for maximum connectivity.

  • Expandable Slots: Includes 2 expansion slots to scale up to 32 x 40GbE ports in a compact 1U form factor.

• Ultra-Low Latency & Performance:

  • Sub-Microsecond Latency: Ensures minimal delay, making it ideal for high-frequency trading, financial services, and high-performance computing (HPC).

  • Throughput: Features a massive 2.56 Tbps switching capacity and 1.44 Bpps forwarding rate for wire-speed performance.

• Data Center Optimized Design:

  • AFI (Back-to-Front) Airflow: Specifically designed for data center hot-aisle/cold-aisle containment, ensuring efficient cooling and equipment longevity.

  • Full Redundancy: Equipped with dual hot-swappable AC power supplies and N+1 redundant fans to ensure 24/7 uptime.

• Advanced Networking & Virtualization:

  • VXLAN Support: Acts as a hardware-based VXLAN gateway, enabling seamless Layer 2 connectivity across Layer 3 networks for large-scale virtualization.

  • Data Center Bridging (DCB): Supports lossless Ethernet (PFC/ETS), critical for storage-heavy traffic like iSCSI and FCoE.

  • MC-LAG: Provides high availability and redundancy without the complexity of Spanning Tree Protocol (STP).

• Management & Automation:

  • Junos OS: Runs on the reliable and consistent Junos operating system.

  • Automation Ready: Fully supports Python, Ansible, and Zero Touch Provisioning (ZTP) for rapid, error-free deployment.

The HPE Aruba J9986A is a high-performance v3 zl2 expansion module designed specifically for the Aruba 5400R zl2 Switch Series. It provides 24 RJ-45 Gigabit Ethernet ports, all of which support IEEE 802.3at PoE+ (up to 30W per port). This module allows network administrators to easily scale their port density and power modern high-speed devices like Wi-Fi 6 access points, PTZ cameras, and VoIP phones within their existing 5400R chassis.

Key Features & Benefits:

• Seamless Scalability: Easily add 24 extra Gigabit ports to your Aruba 5400R 6-slot (J9821A) or 12-slot (J9822A) chassis.

• High Power PoE+: Delivers up to 30W per port, ensuring compatibility with a wide range of PoE-powered devices.

• v3 Architecture: Built on the advanced v3 architecture, offering better performance and lower latency compared to older v2 modules.

• Hot-Swappable: Can be installed or removed without powering down the entire chassis, ensuring zero network downtime.

• Enterprise Reliability: Backed by Aruba’s legendary hardware quality, designed for 24/7 mission-critical environments.

The Cisco WS-X6816-10G-2T is a 16-port 10 Gigabit Ethernet line card from the 6800 Series, specifically engineered to work with the Supervisor Engine 2T. It provides a total of 40 Gbps of switch fabric connection and is ideal for high-bandwidth aggregation or server connectivity. This module features a distributed architecture, allowing for localized packet forwarding and significantly reducing the load on the main supervisor engine.

Key Features:

• 16 High-Speed Ports: Provides 16 ports of 10GbE via X2 transceivers, supporting fiber types like SR, LR, and ER, as well as copper CX4.

• Integrated DFC4 Card: Comes equipped with a Distributed Forwarding Card (DFC4), which enables a sustained forwarding performance of up to 60 Mpps for IPv4 and MPLS traffic.

• Oversubscription & Performance Modes: Can operate in a 4:1 oversubscription mode (using all 16 ports) or a 1:1 performance mode (using 4 ports for dedicated 10Gbps wire-speed).

• Advanced Virtualization: Fully supports Virtual Switching System (VSS), allowing for high-availability network designs and simplified management.

• Large Buffer Capacity: Features 1 GB of onboard memory and hardware-based multicast replication to handle heavy traffic bursts without packet loss.

• Deep Security Integration: Includes support for TrustSec, hardware-accelerated MACsec (on certain supervisors), and advanced ACLs for edge-to-core security.

Technical Specifications: | Feature | Details | | :--- | :--- | | Model Number | WS-X6816-10G-2T / WS-X6816-10GE | | Port Density | 16 x 10 Gigabit Ethernet | | Optics Type | X2 Modules (Fiber/Copper) | | Forwarding Rate | 60 Mpps (with DFC4) | | Switch Fabric Connection | 40 Gbps (Dual 20 Gbps) | | Jumbo Frame Support | Up to 9216 Bytes | | VLAN Support | Up to 4,000 VLANs / 16,000 Bridge Domains | | Chassis Compatibility | Catalyst 6503-E, 6504-E, 6506-E, 6509-E, 6807-XL |

The Grandstream GXP1620 IP Phone is a reliable and cost-effective SIP VoIP desk phone, designed for small to medium businesses and office environments.
It supports 2 SIP lines, delivers HD audio quality, and comes with an easy-to-use interface, making it ideal for daily business communication.

The phone features a clear LCD display, dual switched 10/100 Mbps Ethernet ports, and Power over Ethernet (PoE) support, ensuring simple installation and efficient performance. Its durable design and essential calling features make it a perfect choice for professional use.

• ✔ Model: Grandstream GXP1620

• ✔ Phone Type: IP / VoIP Desk Phone

• ✔ Lines Supported: 2 SIP Lines

• ✔ Display: 132 × 48 pixel LCD

• ✔ Audio: HD Voice (Wideband Audio)

• ✔ Ethernet Ports: Dual 10/100 Mbps

• ✔ PoE Support: Yes

• ✔ Speakerphone: Yes

• ✔ Headset Support: RJ9

• ✔ Protocols: SIP

• ✔ Mounting: Desktop / Wall-Mountable

• ✔ Use Case: Office, Call Center, SMB

• ✔ Brand: Grandstream

• Office Communication

• Small & Medium Businesses

• Reception & Front Desk

• Call Centers

• ✅ Clear HD Voice Quality

• ✅ Easy SIP Configuration

• ✅ PoE for Clean Installation

• ✅ Reliable & Budget-Friendly

• ✅ Ideal for Business Use

The HPE Aruba J9733A Stacking Module is designed to expand and enhance the capabilities of Aruba 2920 Series Switches by enabling high-speed switch stacking. It allows multiple switches to operate as a single logical unit, simplifying management and providing increased bandwidth and redundancy.

This module supports high-speed stacking connections, ensuring seamless communication between switches while maintaining low latency and high reliability. Ideal for enterprise networks, data centers, and campus deployments, the J9733A module helps scale network capacity without increasing management complexity.

• ✔ Model: HPE Aruba J9733A

• ✔ Compatible Series: Aruba 2920 Switch Series

• ✔ Function: Stack Module for connecting multiple switches

• ✔ High-Speed Connectivity: Provides high bandwidth stacking links

• ✔ Simplified Management: Multiple switches act as one logical unit

• ✔ Redundancy: Improves network availability and resilience

• ✔ Easy Installation: Hot-swappable, plug-and-play module

• Enterprise campus networks

• Data center switch aggregation

• High-availability networking

• Scalable switch deployments

• Network redundancy and simplified management

The Cisco SG500-28P is a high-performance, fully managed Gigabit switch designed for small to medium-sized businesses and enterprise networks. With 24 Gigabit ports plus 4 Gigabit uplinks, and PoE (Power over Ethernet) support, it provides reliable connectivity for IP phones, cameras, access points, and other powered devices.

This switch delivers advanced Layer 3 switching features, enhanced security, and energy-efficient operation, making it ideal for modern business networks that require scalability, flexibility, and simplified management.

• 24 x 10/100/1000 Gigabit Ethernet ports with PoE+ support

• 4 x Gigabit uplink ports (combo copper/fiber)

• Total PoE budget: 195W

• Supports Layer 3 static routing, VLANs, QoS, and ACLs

• Manageable via web GUI, CLI, or SNMP

• Advanced monitoring and troubleshooting features

• Energy Efficient Ethernet (EEE) for reduced power consumption

• Fanless design reduces noise for office environments

• Small to medium enterprise LANs

• VoIP and IP camera networks

• Wireless access point uplinks

• Branch office network deployments

The Aruba Instant On 1960 48G 2XT 2XF is a high-density, smart-managed stackable switch engineered for small and growing businesses with high bandwidth requirements. This 52-port switch features 48 Gigabit Ethernet ports for device connectivity, along with two 10GBASE-T (Copper) and two SFP+ (Fiber) 10GbE uplink ports to eliminate network bottlenecks. With its ability to stack up to four switches, it offers seamless scalability and simplified management through a single IP address.

Key Features:

• 10G High-Speed Uplinks: Equipped with 4 dedicated 10GbE ports (2x Copper, 2x Fiber) for ultra-fast connections to servers, storage, or other switches.

• True Stacking: Simplify management by stacking up to four 1960 switches and managing them as a single entity via the Aruba Instant On cloud app or web portal.

• Smart-Managed Layer 2+: Supports advanced features like IPv4/IPv6 static routing, Access Control Lists (ACLs), and Spanning Tree Protocols (STP, RSTP, MSTP).

• Flexible Management: Manage your network from anywhere using the Aruba Instant On Mobile App, the cloud-based web portal, or a local web GUI.

• Robust Security: Built-in security features protect your network from unauthorized access and malicious attacks with support for DHCP snooping and DoS protection.

• High Availability: Stacking provides redundancy; if the master switch fails, another switch takes over instantly, ensuring your network stays online.

Technical Performance:

• Switching Capacity: 176 Gbps.

• Throughput: 131 Mpps.

• Latency: < 2.2 µs (1 Gbps), < 1.1 µs (10 Gbps).

• MAC Address Table: 16,000 entries.

The Cisco Catalyst 1300-8MG-2X is a next-generation fixed managed switch designed for small and medium-sized businesses that demand high performance and reliability. Featuring Multi-Gigabit (2.5G) ports, this switch breaks the 1Gbps bottleneck, allowing you to get the full speed out of modern Wi-Fi 6 access points and high-speed NAS storage.

This switch is uniquely equipped with 60W PoE++ (802.3bt), providing enough power for high-performance devices like pan-tilt-zoom (PTZ) cameras, building control systems, and the latest wireless APs. Managed via the Cisco Business Dashboard or a simplified local web UI, the Catalyst 1300 offers enterprise-level security and Layer 3 static routing without the complexity of traditional high-end switches.

Key Highlights:

• Multi-Gigabit Performance: 2.5Gbps ports ensure your network is ready for ultra-high-speed internet and devices.

• High-Power PoE++: Supports up to 60W per port (PoE++), ideal for power-hungry IoT and Wi-Fi devices.

• 10G Fiber Uplinks: Equipped with 2 x 10G SFP+ slots for lightning-fast connections to your core network or server.

• Enterprise Security: Advanced features like IEEE 802.1X, DHCP Snooping, and IPv6 First Hop Security protect your business data.

• Simplified Management: Easy-to-use mobile app and web interface for quick deployment and monitoring.

• Compact & Quiet: Small form factor design that fits easily in small racks or on desks.

The Cisco Catalyst C3850-NM-8-10G is a high-performance 8-Port 10 Gigabit SFP+ Network Module, specially designed for Cisco Catalyst 3850 Series Switches.
This module provides high-speed uplink connectivity, making it ideal for enterprise networks, data centers, ISPs, and large campus deployments.

It supports 10G SFP+ transceivers for long-distance and high-bandwidth applications, ensuring fast data transfer, low latency, and reliable performance.

• ✔ Model: C3850-NM-8-10G

• ✔ Ports: 8 × 10 Gigabit SFP+ Uplink Ports

• ✔ Compatibility: Cisco Catalyst 3850 Series Switches

• ✔ Port Type: SFP+ (Fiber Optic)

• ✔ Supported Transceivers:

  • 10GBASE-SR

  • 10GBASE-LR

  • Other Cisco-compatible SFP+ modules

• ✔ Hot-Swappable: Yes

• ✔ High Bandwidth: Supports high-speed data transmission up to 10 Gbps per port

• ✔ Network Type: Enterprise / Data Center / Campus Network

• ✔ Performance: Low latency and high reliability

• ✔ Condition: New / Refurbished (as per availability)

• ✔ Brand: Cisco

• Enterprise Network Infrastructure

• Data Centers

• ISP & Telecom Networks

• High-Speed Fiber Connectivity

• Core & Distribution Layer Networking

• ✅ Genuine Cisco Quality

• ✅ Seamless Integration with Catalyst 3850

• ✅ High-Speed 10G Fiber Uplinks

• ✅ Ideal for Network Expansion

• ✅ Reliable & Scalable Solution

The Cisco Business CBS350-48T-4G is a high-density, managed Gigabit switch designed for growing small-to-medium business networks. With 48 Gigabit Ethernet ports and 4 SFP uplinks, it provides the performance and reliability needed for high-traffic office environments, ensuring seamless connectivity for workstations, servers, and storage devices.

Key Features:

• High Density: 48 dedicated Gigabit ports to connect your entire office infrastructure.

• 10G Readiness: Features 4 SFP+ uplink ports for high-speed connections to your network core.

• Simplified Management: Easily managed via the Cisco Business Dashboard or an intuitive web interface.

• Strong Security: Advanced features like Dynamic ARP Inspection, IP Source Guard, and DHCP Snooping to protect your network.

• Eco-Friendly: Energy-efficient design reduces power costs without sacrificing speed.

Best For:

• Large Office Networks

• Server Farm Connectivity

• High-Density Workstation Deployment

• Businesses requiring advanced Layer 3 routing features

The Cisco Catalyst 2970G-24T-E is a 24-port Gigabit managed Layer 2 switch designed for enterprise networks, small and medium business LANs, and campus edge deployments. It provides reliable, high-performance switching with advanced features such as VLANs, QoS, security, and link aggregation.

Built with enterprise-grade hardware and Cisco IOS software, this switch delivers consistent performance for data, voice, and video traffic. With Gigabit RJ45 ports and flexible uplink options, it supports seamless connectivity for servers, routers, access points, and IP devices.

The 2970G series is known for its solid stability, ease of management, and energy-efficient operation, making it a reliable choice for growing networks.

• ✔ 24 × 10/100/1000Base-T Gigabit Ethernet Ports

• ✔ 2 × Uplink Ports (SFP or combo)

• ✔ Managed Layer 2 switching

• ✔ VLAN, QoS, Security (Access Control Lists)

• ✔ Link Aggregation and Port-Trunking

• ✔ Energy-efficient design with low power consumption

• ✔ Rackmount form factor (1U)

• ✔ Cisco IOS management support

• Enterprise LAN access and aggregation

• Office networking for computers and servers

• VoIP phone and IP device connectivity

• CCTV / surveillance camera networks

• Data center edge and access layer

• Campus network distribution

The Cisco Catalyst 3850-48F-E Switch is a high-performance, enterprise-class Layer 3 managed switch designed to meet the demands of modern campus and enterprise networks. Powered by Cisco IOS XE software, this switch delivers advanced security, scalability, and unified wired and wireless management.

Equipped with 48 Gigabit Ethernet SFP (fiber) ports, the 3850-48F-E is ideal for environments requiring high-speed fiber connectivity, such as large enterprises, campuses, data centers, and service provider edge networks. It supports advanced routing, switching, and security features, making it suitable for mission-critical applications.

The switch includes modular uplink options, StackWise-480 technology for stacking up to 9 switches, and enhanced network visibility and control. With its robust design and enterprise-grade reliability, the Cisco 3850-48F-E ensures stable, secure, and scalable network performance.

• 48 x 1G SFP Fiber Ports

• Layer 2 & Layer 3 Switching

• Cisco IOS XE Operating System

• StackWise-480 Technology (Up to 480 Gbps stacking bandwidth)

• Advanced Security Features (ACLs, TrustSec, MACsec)

• High Availability & Redundancy Support

• Modular Uplink Ports (10G Support)

• Enterprise-Grade Performance & Reliability

Model: Cisco Catalyst 3850-48F-E
Switch Type: Managed Layer 3 Switch
Total Ports: 48 × Gigabit Ethernet SFP (Fiber)
Uplink Ports: Modular uplink (1G / 10G options)
Switching Capacity: Up to 176 Gbps
Stacking Support: Yes (StackWise-480)
Routing Protocols: Static, RIP, OSPF, EIGRP, BGP
VLAN Support: Yes
Security: 802.1X, ACLs, MACsec, TrustSec
Management: CLI, SNMP, Web GUI
Operating Temperature: 0°C to 45°C
Mounting: Rack Mountable (1U)

• Enterprise & Corporate Networks

• Campus LANs

• Data Centers

• ISP & Service Provider Networks

• High-Speed Fiber Backbone Connectivity

✔ Enterprise-grade security and performance
✔ Scalable stacking and uplink flexibility
✔ Reliable fiber-based networking
✔ Ideal for large-scale and mission-critical deployments

The HP ProCurve 6200YL-24G is a high-performance, rack-mountable, Layer-3 managed network switch, designed for enterprise-class networks, data centers, and backbone aggregation. It combines robust Gigabit connectivity with advanced management, security, and routing capabilities — making it ideal as a core or distribution switch in complex network infrastructures.

With support for 24 mini-GBIC (SFP) ports and optional 10-Gigabit uplinks, this switch offers versatility, scalability, and future-proofing for growing network demands.

The Cisco DS‑CAC‑1200W‑E is a 1200 W AC power supply module designed for Cisco MDS 9300 Series Multilayer Fabric Switches. It delivers high-capacity, reliable power with a port-side exhaust airflow configuration, suitable for efficient cooling in data center environments.

• Power Output: 1200 W AC for high-performance switching and fabric workloads.

• AC Input Voltage: 100–240 V AC, 50–60 Hz.

• Airflow Direction: Port-side exhaust, optimized for back-to-front chassis airflow.

• Hot-Swappable: Can be replaced without shutting down the switch, minimizing downtime.

• Redundancy Support: Supports 1+1 redundant PSU configurations for high availability.

• Status Indicators: Built-in LEDs for power and health status monitoring.

Designed for enterprise storage networks and data centers to power Cisco MDS 9300 Series switches reliably while maintaining proper cooling and operational efficiency.

Compatible with Cisco MDS 9300 Series Fibre Channel and Multilayer Fabric Switches that require 1200 W AC power with port-side exhaust airflow configuration.

The Cisco DS‑CAC‑1200W‑E provides reliable 1200 W AC power, supports redundancy and hot-swappable operation, and is suitable for mission-critical storage network environments in data centers.

The Cisco MDS 9148S (DS-C9148S-12PK9) is a high-performance, flexible, and cost-effective 16-Gbps Fibre Channel switch designed for enterprise-level Storage Area Networks (SAN). It provides a perfect balance of performance and scalability in a compact 1RU form factor. This switch is ideal for small to medium-sized storage environments or as an edge switch in large-scale data center core-edge topologies.

Key Features & Benefits:

• Scalable "Pay-as-you-grow": Start small with 12 active ports and expand up to 48 ports using software licenses, protecting your initial investment.

• Enterprise-Class Performance: Dedicated 16-Gbps bandwidth per port ensures zero-oversubscription and high throughput for virtualized workloads.

• High Availability: Supports dual redundant hot-swappable power supplies and fan trays to ensure non-stop operations for mission-critical data.

• Advanced Diagnostics: Includes Cisco's Smart Zoning and built-in network analysis tools to simplify management and troubleshooting.

• Superior Security: Provides robust security with support for RADIUS, TACACS+, and hardware-based zoning to protect sensitive storage data.

• Chassis Height: 1U

• Aggregate Bandwidth: 768 Gbps

• Software: Cisco MDS 9000 NX-OS Software

• Management: Cisco Prime Data Center Network Manager (DCNM), CLI, Web-based.

The HP ProCurve 3500-48G-PoE yl is an advanced, enterprise-class chassis-style stackable switch designed for the edge of the network or the core of smaller networks. It features 48 Gigabit Ethernet ports with full Power over Ethernet (PoE) capabilities, allowing you to power IP phones, wireless access points, and security cameras directly through the network cable. Built on a high-performance ProVision ASIC, this switch offers wire-speed routing and low latency, making it ideal for voice, video, and data convergence.

Key Features and Benefits:

• Full PoE Support: Delivers up to 15.4W per port (802.3af) across all 48 ports, simplifying deployment of powered devices.

• Layer 3 Routing: Includes robust routing capabilities such as static IP routing, RIP (v1/v2), and OSPF, giving you more control over your network traffic.

• Modular Uplink Flexibility: Features a rear slot for an optional 10-GbE module, allowing for high-speed uplinks to the core network as your bandwidth needs grow.

• High Availability: Supports redundant power supplies (optional) and features a rugged design for maximum uptime in mission-critical environments.

• Advanced Security: Provides a comprehensive suite of security features including Access Control Lists (ACLs), 802.1X port-based authentication, and MAC-based security to protect against unauthorized access.

• Lifetime Warranty: As part of the HP ProCurve family, this switch is legendary for its reliability and build quality.

The HP ProCurve 6600-48G-4XG is a high-performance, purpose-built Layer 3 managed switch designed for server-edge connectivity and data center environments. It features a unique Front-to-Back airflow design, making it ideal for rack cooling efficiency. With 48 Gigabit Ethernet ports and 4 integrated 10-Gigabit SFP+ ports, this switch provides massive uplink bandwidth and low-latency performance for mission-critical applications.

Key Features and Benefits:

• 10-Gigabit Connectivity: Comes with 4 built-in SFP+ slots that support 10GbE uplinks, ensuring your network backbone can handle high-density data traffic without bottlenecks.

• Data Center Optimized: Designed with cooling in mind, the 6600 series features a reversible airflow option and redundant, hot-swappable power supplies and fans for maximum uptime.

• Full Layer 3 Feature Set: Supports advanced routing protocols including OSPF, BGP, and PBR (Policy Based Routing), allowing it to function as a powerful core or distribution layer switch.

• High Performance: Boasts a massive 176 Gbps switching capacity and a throughput of up to 131 Mpps, ensuring wire-speed performance across all ports.

• Enterprise Security: Includes sophisticated security measures such as Access Control Lists (ACLs), identity-based authentication (802.1X), and hardware-based protection against broadcast storms.

• ProVision ASIC Technology: Built on HP’s specialized silicon architecture, providing high scalability, low latency, and intelligent traffic management.

The HP ProCurve 2910al-24G (J9145A) is a flexible and high-performance Layer 3 managed switch designed for the enterprise edge, branch offices, and data center top-of-rack deployments. It features 24 Gigabit Ethernet ports, four of which are dual-personality for fiber connectivity. This switch is built for scalability, offering two expansion slots that can support up to four 10-Gigabit Ethernet ports (SFP+ or CX4). With its high switching capacity of 128 Gbps and robust security features, the 2910al provides a cost-effective and reliable foundation for high-performance networks.

Key Features & Benefits:

• Flexible 10G Uplinks: Supports up to four optional 10-Gigabit ports, allowing you to easily upgrade your network backbone as bandwidth needs grow.

• Dual-Personality Ports: Four ports can be used as either RJ-45 copper or SFP fiber slots, giving you flexibility for different wiring needs.

• Layer 3 Routing: Includes static and RIP IPv4 routing, enabling efficient traffic management between different network segments.

• Stackable Management: Supports "virtual stacking," allowing you to manage up to 16 switches through a single IP address.

• Enterprise Security: Features advanced access control lists (ACLs), 802.1X port authentication, and sFlow for detailed network monitoring and protection.

The HPE Aruba CX 6300 Series Switch (JL662A) is a high-performance, fully managed Layer 3 enterprise switch designed for modern campus and branch networks. It combines 24 Gigabit RJ-45 PoE+ ports with 4 high-speed 50G SFP56 uplinks, delivering scalable, high-bandwidth connectivity for demanding enterprise applications.

Built on Aruba’s Cloud-Ready CX architecture, the JL662A provides programmable, intelligent switching, enhanced automation, and advanced analytics. Its PoE+ capabilities allow direct powering of devices such as IP phones, wireless access points, and security cameras, reducing cabling complexity and deployment costs.

The CX 6300 series supports advanced Layer 3 routing protocols, VXLAN, and full-stack automation, making it ideal for next-generation enterprise networks. Aruba’s AOS-CX software ensures high reliability, security, and performance while simplifying management through the Aruba Network Analytics Engine (NAE) and Aruba Central.

This switch is ideal for enterprises seeking flexible, high-speed access or aggregation, with enhanced monitoring, security, and automation to meet the demands of modern digital workplaces.

• 24 × 1GbE RJ-45 PoE+ ports

• 4 × 50G SFP56 uplink ports for high-speed aggregation

• Line-rate Layer 2 and Layer 3 switching

• IEEE 802.3at PoE+ on all RJ-45 ports

• Supports powering IP phones, APs, cameras, and IoT devices

• Total PoE budget dependent on model (consult datasheet for specifics)

• Static and dynamic routing (OSPF, BGP, RIP, VRRP)

• VXLAN support for network segmentation

• Automation and programmability via Aruba AOS-CX

• Aruba Network Analytics Engine (NAE) for real-time monitoring

• 802.1X authentication

• Access Control Lists (ACLs)

• Dynamic ARP Inspection, DHCP Snooping, IP Source Guard

• Role-based access and policy enforcement

• CLI, REST APIs, and web GUI

• Aruba Central cloud-based management

• SNMP v2/v3 for network monitoring

• Automation-friendly for large deployments

• Redundant power supply support

• Hot-swappable components

• High availability with VSF (Virtual Switching Framework) support

• Enterprise access layer or aggregation switch

• High-density campus deployments

• PoE+ deployment for IP phones, APs, and cameras

• Digital workplaces and IoT device connectivity

• Branch office and small-to-medium enterprise networks

Brand: HPE / Aruba
Model Number: JL662A
Series: Aruba CX 6300
Ports: 24 × 1GbE RJ-45 PoE+ + 4 × 50G SFP56
PoE Support: PoE+ (802.3at)
Usage/Application: Enterprise Networking / LAN Access / PoE+ Devices
Material: Metal chassis
Color: Gray / Silver
Management: AOS-CX, CLI, Web GUI, Aruba Central
Packaging Type: Box
Minimum Order Quantity: 1 Piece
Operating Temperature: 0°C to 45°C
Storage Temperature: -40°C to 70°C
Relative Humidity: 5% to 95% non-condensing

This is a high-performance, Refurbished Juniper MX480 Chassis, a modular and carrier-grade routing platform designed for service providers and large enterprise networks. It offers high density, reliability, and massive throughput in a compact 8U form factor. Each unit is thoroughly tested to ensure it meets original factory performance standards.

Key Technical Features:

• Scalable Modular Design: Includes 6 slots for DPCs, MPCs, or FPCs, allowing for flexible port configurations from 1GbE to 400GbE.

• Carrier-Grade Reliability: Supports fully redundant hardware (Routing Engines, Fan Trays, and Power Supplies) for 99.999% system availability.

• Proven Performance: Ideal for core routing, edge applications, and data center interconnects (DCI).

• Cost-Effective Solution: Get enterprise-grade performance at a fraction of the cost of new equipment.

• Tested & Certified: Our used units undergo rigorous diagnostic testing to ensure all slots and components are fully functional.