Dynamic IT Devices Private Limited

We are engaged in offering Cisco C9200-NM-4X Switch to our clients. Our range of all products is widely appreciated by our clients.

We are engaged in offering Cisco NIM-2MFT-T1/E1 Network Interface Modules to our clients. Our range of all products is widely appreciated by our clients.

The Cisco Catalyst^® 6500 Series Switches offer a variety of 10 Gigabit and Gigabit Ethernet modules which work in conjunction with the new Catalyst 6500 Supervisor Engine 2T/2TXL (VS-S2T-10G & VS-S2T-10GXL) to serve different needs in the campus and data center for enterprise, commercial, and service provider customers. The modules in this family include the new 6800 Series 16-port 10 Gigabit Ethernet Fiber Module, 16-port 10 Gigabit Ethernet Copper Module, 48-port Gigabit Ethernet Copper Module, 48-port Gigabit Ethernet Fiber Module and 24-port Gigabit Ethernet Fiber Module. The 10 Gigabit Fiber Module supports 10GBASE-CX4, -SR, -LRM, -LX4, -LR, -ZR and -ER X2 fiber modules to provide operational distances up to 80 km over single-mode fiber. The 10 Gigabit Ethernet Copper Module supports RJ-45 connectors and operational distance of up to 55 m over Category 6 Unshielded Twisted Pair (UTP) copper cabling; 100 meters over Category 6 Shielded Twisted Pair (STP) copper cabling, 100 meters over Category 6A UTP & STP copper cabling, and 100 meters over Category 7 STP copper cabling. Similarly Gigabit Ethernet Copper Module supports RJ-45 connectors and provides operational distance of up to 100 meters over Category 5, 5E & 6 UTP copper cabling. The Gigabit Fiber Modules support pluggable optics and provide operational distances of up to 80 km over single-mode fiber and over multimode fiber.

 

The 6800 series 16-port 10 Gigabit Ethernet fiber module is suitable for deployment in access and aggregation network in Campus and Data Center:

• WS-X6816-10G-2T: 16-port 10 Gigabit Ethernet Fiber Module with DFC4 (Figure 1)
• WS-X6816-10G-2TXL: 16-port 10 Gigabit Ethernet Fiber Module DFC4XL (Figure 1)
• Backplane connection: Connects to the switch fabric using dual full-duplex 20 Gbps switch fabric channels (40 Gbps total)
• Chassis/slot support: Can occupy any slot in Cisco Catalyst 6503E, 6504E, 6506E, 6509E, and 6509-V-E. Can occupy slots 1-6 and 9-13 in a Cisco Catalyst 6513-E
• Supervisor engine: Compatible with Supervisor Engine 2T and Supervisor Engine 2TXL.
• Distributed forwarding and performance: Comes equipped with DFC4 or DFC4XL daughter cards, delivering optimal performance up to a sustained 60 Mpps for L2, IPv4 and MPLS forwarding and 30 Mpps for IPv6 forwarding.
• The 6800 Series 16-port 10 Gigabit Ethernet Fiber module (Figure 1) provides up to 176 10 Gigabit Ethernet Fiber ports in a single Cisco Catalyst 6513-E Switch chassis, 352 10 Gigabit Ethernet Fiber ports in a Cisco Catalyst 6500 Virtual Switching System (VSS) 2T. 
• CISCO Network Interface Cards WS-X6816-10G-2T, CISCO Network Interface Cards WS-X6816-10G-2T ,CISCO Network Interface Cards WS-X6816-10G-2T 

A WAN interface card is a specialised network interface card (NIC) that allows a network device such as a router to connect and transmit data over a Wide Area Network. A WIC has a built-in channel service data unit (CSU/DSU) interface to connect to a digital circuit and provide error correction and line monitoring.

EHWIC-1GE-SFP-CU DatasheetGet a QuoteOverviewCisco Enhanced HWIC Interface Card integrates both dual mode SFP and RJ-45 ports. EHWIC-1GE-SFP-CU speed up the convergence of applications such asEthernet WAN access, IVR, and high-speed connectivity to LAN switches.The FeaturesFigure 1 shows the EHWIC-1GE-SFP-CU.☆ 1 10/100/1000 Base-T port☆ 1 dual mode SFP port☆ Digital Optical Monitoring (DOM)☆ Single-wide EHWIC, but no slot restrictions☆ Low-cost, high-speed, and long-distance connectivity for Cisco ISRs, interoffice connectivity to avoid expensive leased lines☆ Either the SFP or the RJ-45 Port can be available, 1 port activeThe single-port can be activated when integrate with Cisco Integrated Service Router Generation 2 (ISR G2). EHWIC-1GE-SFP-CU has SFP port and RJ-45 copperport where either the SFP (mini-GBIC) or the RJ-45 can be active, but not both at the time.

Details:

• Flexible coder prints up to 6 lines of text, numbers, barcodes and logos, including MFD, MRP and PKD codes
• Simple self-service with up to two years between services – no engineer required
• Quick-change fluid cartridges
• IP55-rated stainless steel enclosure as standard with IP65 option
• Real-time output measurement and line stoppage logs
• Range of ink types and colours for both consumer and industrial marking
• Date freezing for batch printing – ideal for 24/7 operations
• Variable character spacing improves vision system recognition
• Prompts to ensure correct date and text is added to message
• Simple to insert text or logos into messages
• Linx Printernet enabled – remote monitoring and control of Linx 8900 printers via a secure, cloud-based service. Cisco Interface Card EHWIC-1GE-SU SFP, Cisco Interface Card EHWIC-1GE-SU SFP, Cisco Interface Card EHWIC-1GE-SU SFP.

The 900535 Network Interface Card (NIC) is a plug-in connectivityproduct that offers an easy, cost-effective solution providing expanded access to TMS/LC2000data via LAN/WAN Ethernet networks. Since the NIC supports communications across Gateways/Routers, WAN-users now have an extremely cost-effective alternative to dial-up connections for remote monitoring. With the addition of TMSCOMM Autopoll and WebServe software to the network, users can establish a near real-time TMS/LC2000Server database containing all current tank, sensor and alarm statuses, as well as all system logs, available to all network users. See WebServe specifications for details on this product.

Features:

• Add Ethernet IP-addressability to any TMS/LC2000System
• Available as a factory-shipped option or as a field upgrade for any TMS/LC2000
• Installs within the locked TMS/LC2000enclosure for secure, tamperproof connectivity
• Easy, user-programmable IP Address, Subnet Mask and Gateway Address programming with included TMSnet software.

We are engaged in offering NIM-8MFT-T1/E1 Network Interface Modules to our clients. Our range of all products is widely appreciated by our clients.

We are engaged in offering Cisco C3850-NM-8-10G Network Switch to our clients. Our range of all products is widely appreciated by our clients.

We are engaged in offering Cisco SM-X-4X1G-1X10G Transceiver Modules to our clients. Our range of all products is widely appreciated by our clients.